37

Adjusting the Image Quality

If flickering, fuzziness or interference appear in

images that are input from the computer, and this

cannot be fixed using automatic setup, you will

need to adjust the sync manually using the

following procedure.

PROCEDURE
Press the [Menu] button on the remote control, and then select "Sync." from the "Video" menu.For details on this operation, refer to "Using the Configuration
Menus". p.57
Press the [ ] and [ ] buttons to set the sync value to a value that causes the flickering, fuzziness or interference to disappear from the image.The sync value increases or decreases each time a button is
pressed.
After making the adjustment, press the [Menu] button
to exit the configuration menu.
Adjusting the Sync
1
+
-
+
-
+
-
Color Mode Select
Video
Audio
Setting
User's Logo
Advanced
About
Position Adjust
Tracking 0000
Sync . 0
Brightness 0
Contrast
Sharpness 0
Reset All
0
:
:
:
:
:
[Normal ]
[Normal ]
[ESC]: Return[ ]: Select [ ]: Adjust [Menu]: Exit
:
Auto Setup
Reset
Execute
ON OFF
:
Select
:
Input Signal:
[Computer ]
2
+
-
+
-
+
-
Color Mode Select
Video
Audio
Setting
User's Logo
Advanced
About
Position Adjust
Tracking 0000
Sync . 10
Brightness 0
Contrast
Sharpness 0
Reset All
0
:
:
:
:
:
[Normal ]
:
:
Input Signal
Auto Setup
Reset
Execute
ON OFF
:
:
Select
[ESC]: Return[ ]: Select [ ]: Adjust [Menu]: Exit
[Computer ]
3
TIP

• If you adjust the sync without adjusting the tracking first, it will not

be possible to get the best adjustment results. Incorrect tracking

adjustment may not be noticeable with some types of picture.

However, pictures with lots of lines and shading will tend to show

incorrect tracking adjustments more clearly, so be sure to check the

tracking adjustment first.

• It may also be possible to fix flickering and fuzziness by adjusting

the brightness, contrast , sharpness and keystone correction

settings.