19
Connecting to a Computer
Using the Remote Control to Operate the Mouse Pointer (Wireless Mouse Function)You can use the remote control as a wireless mouse to control the mouse
pointer on the computer screen. To do this, you must use the accessory
USB cable to connect the USB port of the computer to the USB port at
the rear of the projector.
* When using the remote control as a wireless mouse, the [Page down] and
[Page up] buttons on the remote control can be used to scroll back and
forth through pages when projecting a PowerPoint presentation.
Computer Mouse used Applicable cable
Windows 98/2000/Me/
XP Home Edition/
XP Professional
USB mouse USB cable (accessory)
Macintosh
(OS 8.6 - 9.2/X/10.1) USB mouse USB cable (accessory)
USB cable
(accessory)
To USB port
To USB port
TIP
• The USB cable can only be connected to computers with a standard
USB interface. If using a computer which is running Windows, the
computer must have had a full version of Windows 98/2000/Me/XP
Home Edition/XP Professional installed. If the computer is running
a version of Windows 98/2000/Me/XP Home Edition/XP
Professional that has been upgraded from an earlier version of
Windows, correct operation cannot be guaranteed.
• It may not be possible to use the mouse function under some
versions of both the Windows and Macintosh operating systems.
• Some computer settings may have to be changed in order for the
mouse function to be used. Consult the documentation for the
computer for further details.