23
Connecting to a Video Source
Projecting Component Video Images
Use the optional component video cable to connect the video source to the
Computer/Component Video port at the rear of the projector. See
"Appendices: Optional Accessories" p.84
Projecting RGB Video Images
RGB video is used when RGB signals that have copy protection added are
input and projected. Use the accessory computer cable to connect the video
source to the Computer/Component Video port on the rear of the projector.
Component video cable
(optional)
To component video
output port
To Computer/
Component
Video port (blue)
TIP
• After projection starts, change the "Input Signal" setting in the
"Video" menu to either "Component Video (YCbCr )" or
"Component Video (YPbPr )" to match the signals from the video
equipment. p.48
• If more than one external component is connected to the projector,
use the [Source] button on the projector's control panel or the
[Computer] button on the remote control to set the input source to
"Component Video (YCbCr)" or "Component Video (YPbPr)",
depending on the type of signal being input. p.28
To RGB output port
To Computer/
Component Video
port (blue)
Computer cable
(accessory)
TIP
• After projection starts, change the "Input Signal" setting in the
"Video" menu to "Computer". p.46
• For a RGB connection, a commercially available adapter or
converter cable might be required.