58
Using the Configuration Menu FunctionsUsing the Configuration Menu Functions
Select a setting value.
Press the [ ] and [ ] buttons to change the setting value.
For items which are currently set, next to the setting appears
in green. If you use the [ ] and [ ] buttons to select an item to
be set, the will appear in orange. After making the selection,
press the [Enter] button to accept the setting. When the setting
is accepted, the changes to green.
Select other menu items in the same way.
Repeat steps 2 to 5 to change the setting for other menu items.
To return to a previous menu, press the [ESC] button.
Close the menu.
Press the [Menu] button.
5
Language Select [English]
Reset Execute
Brightness Control High Low
:
COM Port
:
Startup Screen
Color Adjustment
Color Temp. RGB
Rear Proj .
Ceiling ON OFF
RS-232C USB
Adjust
ON OFF
ON OFF
:
:
:
:
TIP
• Sub-menu items which cause another sub-menu to be displayed
when they are selected have after them. If you select such menu
items and press the [Enter] button, you can then change the settings
in the next sub-menu which appears.
• Refer to "List of Functions" for details on the functions of each
menu item. p.45
6
7