50
Using the Configuration Menu FunctionsUsing the Configuration Menu Functions
"Setting" Menu
+
-
Auto Keystone
Auto Keystone
Reset
Reset
Execute
Execute
Keystone
Keystone
0
0
No-Signal Msg.
No-Signal Msg.
OFF
OFF
Logo
Logo
Prompt
Prompt
ON
ON
OFF
OFF
ON
ON
OFF
OFF
ON
ON
OFF
OFF
Color Mode Prompt
Color Mode Prompt
Black
Black
Blue
Blue
Sleep Mode
Sleep Mode
ON
ON
OFF
OFF
A/V Mute
A/V Mute
Logo
Logo
Black
Black
Blue
Blue
Video
Audio
Setting
User's Logo
Advanced
About
Reset All
:
:
:
:
:
:
:
:
[Menu]: Exit[ ]: Enter[ ]: Select
Sub-menu Function Default
Keystone Corrects vertical keystone distortion in images.
•When keystone correction is carried out, the projected
image will become smaller.
•If the images become uneven in appearance after keystone
correction is carried out, decrease the sharpness setting.
Median value
(0)
Auto
Keystone
Sets the function for automatically correcting keystone
distortion when the angle of the projector has been adjusted
to "ON" or "OFF". This function is only enabled when the
"Rear Proj. " and "Ceiling" commands in the "Advanced"
menu are set to "OFF". If either "Rear Proj. " or "Ceiling" is
set to "ON", this menu cannot be selected.
ON
No-Signal
Msg.
Sets the message status and background colour at times such
as when no image signal is being input.
When set to "OFF", the background colour becomes black
and no message is displayed.
•To change the user's logo, you need to record your own
logo. p.81
Blue
Prompt Sets whether the input signal name is displayed on the screen
or not when the input signal is changed.
ON
Color
Mode
Prompt
Sets whether the colour mode prompt is displayed on the
screen or not when the colour mode is changed.
ON
A/V Mute Sets the screen status when the [A/V Mute] button on the
remote control is pressed.
•To change the user's logo, you need to record your own
logo. p.81
Black
Sleep
Mode
Sets the energy saving operation when no signal is being
input.
•When set to "ON", projection stops automatically and then
after the cool-down period is finished, the projector
changes to sleep mode if no operations are carried out for
30 minutes while the "No-Signal." message is being
displayed. (The Power indicator lights orange.)
•Projection starts again when the [Power] button on the
projector's control panel or the remote control is pressed.
OFF