18

Connecting to a Computer

Playing Sound from the Computer

The projector has a single built-in speaker with a maximum output of 1 W.

If the computer that is connected to the projector has an audio output port,

you can output sound from the computer through the projector's speaker by

connecting the computer's audio output port and the Audio 1 port (stereo

mini jack) on the rear of the projector using a stereo mini jack audio cable

(commercially-available). It is recommended that you use an audio cable

with a 3.5 mm diameter stereo mini jack.

Use the following procedure to adjust the volume of the sound output.

PROCEDURE

Press the [Menu] button on the remote control, and

then select "Volume" from the "Audio" menu.

For details on this operation, refer to "Using the Configuration

Menus". p.57

Use the [ ] and [ ] buttons to adjust the volume.

The volume is increased or reduced each time a button is

pressed.

After making the adjustment, press the [Menu] button

to exit the configuration menu.
Stereo mini jack audio cable
(commercially-available)
To audio output port
To Audio 1 port
1
Reset
Execute
:
Audio Input
Audio 1 Audio 2
+
-
Video
Audio
Setting
User's Logo
Advanced
About
Reset All
Volume 10
[ESC]: Return[ ]: Select [ ]: Adjust [Menu]: Exit
2
Video
Audio
Setting
User's Logo
Advanced
About
Reset All
Reset
Execute
:
Audio Input
Audio 1 Audio 2
+
-
Volume 15
[ESC]: Return[ ]: Select [ ]: Adjust [Menu]: Exit
3