Connecting the scanner
Connect the scanner to your computer or to another SCSI device as follows:
Note:
The combination of
1.Make sure the scanner, computer, and all other SCSI devices are turned off and unplugged from the power source.
cCaution:
Do not connect the scanner to the computer or other devices while they are turned on; otherwise damage may occur.
2.Connect one end of the cable to the scanner SCSI connector; then squeeze the wire clips together until they lock in place on both sides.
SW
ON
This is an example using the scanner’s
Note:
❑To connect the scanner to a SCSI device other than the computer, the length of cable in the daisy chain must be 6 meters or less; otherwise the system may not work properly.
❑To connect the scanner to a PC using
cable must be 3 meters or less.
