3. Connect the other end of the cable to the SCSI port of your
computer or another SCSI device.
Note:
The SCSI port of the Macintosh is the larger port with the SCSI
icon over it.
4. Connect the power cables of your computer, scanner, and
other external SCSI devices.
Note:
Before turning on your system, be sure to read “Power-on sequence”
below.
Power-on sequence
Keep the following in mind every time you turn on your
computer and SCSI devices (such as the scanner).
Be sure to turn on SCSI devices first, then your computer. If
you attempt to use a SCSI device which has been turned on
after the computer, it may not work properly, or the
computer may not work properly.
R
GT-5500 Rev.C
A5 size Chapter 1
July-18-97 Pass 0, DR
Setting Up the Scanner 1-11