❑For Windows 95 users:
The first time you turn on the computer after turning on the scanner, either of the following dialog boxes may appear.
If you see either of these, follow the installation instructions in Chapter 1 of your scanner software manual, and then see
Power-off sequence
Keep the following in mind every time you turn off your computer and SCSI devices.
❑When you are finished using your system, turn off your computer first, then the scanner and other SCSI devices.
❑While using your computer, do not turn off the SCSI device whose terminator is active (on).
❑Do not turn the scanner off and back on while using your computer, otherwise the scanner may not scan properly.
Now that the connection is completed, you need to install the scanner software. See Chapter 1 of your scanner software manual.
