If you have trouble copying the entire diskette, some of the sectors may be bad. Try using the COPY command to copy one file at a time. Then repeat the operation to see if it works on the copy. If it does, the original diskette is damaged.

2.Is the diskette write-protected? If the write-protect switch is set, first make sure the diskette does not contain files you do not want to change or lose. Then try moving the switch to remove the write protection. (Ordinarily, it’s a good idea to leave program diskettes write-protected, but some programs don’t work properly on write-protected diskettes.)

3.Try formatting a blank diskette to determine if the diskette drive is operating properly.

If you cannot format a diskette, contact your Epson dealer.

Hard Disk Problems

If you have problems with your hard disk when you first start to use it, make sure it is properly set up. See the instructions for setting up the hard disk in your MS-DOS Installation Guide.

If the hard disk still does not work, contact your Epson dealer or have an authorized Epson Customer Care Center check your hard disk. Never open the airtight container that encloses the hard disk.

Troubleshooting 4-5