Epson LT-286e SETLCD, 1.Type COPY AUTOEXEC.BAT + CON AUTOEXEC.BAT and press Enter, HDDP SAVE, Type, 1and 18), 4.Press F6 and then Enter, 2-26 Using the Equity LT-286e

QInstall the appropriate keyboard information for the country in which you’re using your computer

Q Allow you to start the MS-DOS Shell program.

These instructions ensure that your system starts up properly each time you boot it from the hard disk. See your MS-DOS Installation Guide for details.

You’ll also want to add the SETLCD and HDDPSAVE utilities to your AUTOEXEC.BAT file. By adding these utilities, you can set the backlight period for the LCD screen and the power- off period for the hard disk each time you power on the computer. Also, by adding the SETLCD utility to the AUTOEXEC.BAT file, you can modify the gray-scale modes at any time.

To modify the AUTOEXEC.BAT file created by SELECT, follow these steps:

1.Type COPY AUTOEXEC.BAT + CON AUTOEXEC.BAT and press Enter.

2.Type SETLCD /5 and press Enter. This turns off backlighting after five minutes. Use any time period you want (between 1 and 60).

3.Type HDDP SAVE / 5 and press Enter. This turns off power to the hard disk if you do not access the hard disk for five minutes. Use any time period you want (between

1and 18).

4.Press F6 and then Enter.

2-26Using the Equity LT-286e