Switch 3--This switch is reserved and must always be set to ON.Switch 4-This switch is reserved and must always be set to ON.Switch 5-This switch is reserved and must always be set to ON.

Switch 6-This switch selects the LCD mode of your screen. Set this switch to ON for the expanded LCD mode; in this mode, the LT-286e displays larger characters to fill the screen. Set this switch to OFF for the standard LCD mode; in this mode, the LT-286e displays characters in the standard size and you see a one-inch margin on the top and bottom of the screen.

Switch 7, Switch 8, Switch 9, Switch 10--These switches define the EGA configuration.

The following switches are located on SW2. These DIP switches define how the computer identifies peripherals attached to the computer.

Switch l-Thisswitch is not used and must be set to ON.

Switch 2-This switch defines your diskette drive assignments. Set this switch to ON to identify the internal diskette drive as drive A; an external, 5 ‘/4-inch drive is drive B.

Set this switch to OFF to identify the external diskette drive as drive A; the internal diskette drive becomes drive B.

Switch 3-Thisswitch is not used and must always be set to ON.
DIP Switches and Slide Switches A-7