where XX can be any value from 1 to 60. Then press Enter. For example, to turn off the screen’s backlighting after two minutes, type:

SETLCD /2

and press Enter. If you don’t press any key for two minutes, the system automatically turns off the screen’s backlighting. To turn it on again, press any key. To do this without disturbing a program running on your computer, press Shift, Ctrl, or Alt.

To make sure backlighting is always on, type one of the following:

SETLCD /0

SETLCD /00

SETLCD /ALL

and press Enter.

Note

When you are running a memory-resident program that intercepts keyboard entries, the computer cannot restore the screen’s backlighting after it has been turned off. If the screen’s backlighting does not come back on when you press a key, you may want to set the backlight so it is always on,

If you do not use the SETLCD program, the screen is always on.

Using the Equity LT-286e

2-13