3 Connecting a Printer

The Equity LT-286e has both parallel and serial interfaces (ports). You can easily connect a printer or plotter that has either type of interface. Just follow the instructions below. Of course, Epson offers a full range of printer products; consult your Epson dealer for more information.

Using the Parallel Interface

The computer’s Centronics®-compatible parallel interface provides a 25-pin, D-shaped female connector. Most Epson printers have parallel interfaces. To connect a printer to the computer, you need an IBM PC-compatible printer cable. If you’re not sure which one you need, consult your Epson dealer.

Once you. have a printer cable, follow these steps to connect your printer to the parallel interface labeled PRINTER on the computer:

1.Place the printer next to your computer.

2.Before you connect the printer, make sure the power switches on the computer and printer are off. (The power switch for your computer is located on the right side of the machine).

1-6 Setting Up Your System