4. Operation
OP1 Rev.1a 21
I/O Monitor screen (8-bit display)
“*” (asterisk) is displayed before the signal for remote setting to separate remote setting and
I/O label.
In the 32-bit display, you can touch the currently displayed I/O column and temporarily
confirm the I/O label in the popup window. The popup window disappears by touching.
Touching the “INPUT”, “OUTPUT” or “MEMORY” area displayed at the top left of the
screen successively switches the display in the following order: I/O input → I/O output →
memory I/O.
An ON (1) state is indicated as “ ”, and an OFF (0) state is indicated as “ ”.
The I/O to be displayed can be moved by eight bits by touching the <←> or <→> button.
You can touch the I/O number to directly specify the number.
Switches to the 32-bit display.
Switches to the 8-bit display.
When inputs and outputs that are not installed are displayed, the display will show all OFF.