4. Operation

4.3 Program Execution Screen

Program Execution screen (when operations from the Operator Panel are not available)

(1) Mode

(2) Emergency Stop state

(3) Safetyguard state

(6) Serious Error state

(7) Error state

(4) Motor energization state

(5) Manipulator home state

(8) Warning state

(9) Program number.

(10) Start

(11) Pause

(12) Ready

The program execution screen is for confirming Robot or Controller states, and for selecting and executing programs.

(1)Mode

This displays the operation mode of the Controller.

In the “TEACH MODE”, the robot is operated from the Teach Pendant.

AUTO MODE

Refer : Controller RC170 Setup & Operation 4.4 Auto Mode (AUTO) Program.

PROGRAM MODE

Refer : Controller RC170 Setup & Operation 4.3 Program Mode (AUTO).

(2)Emergency Stop state

This turns ON ( display) when the controller is in the emergency stop state.

(3)Safetyguard state

This turns ON ( display) when the safety door is open.

(4)Motor energization state

This displays the energization state of the manipulator. This turns ON ( display) when the manipulator has been assigned instruction to energize all joints for executing a motion.

(5)Manipulator home state

This turns ON ( display) when all manipulator joints are at their home positions.

16

OP1 Rev.1a

Page 24
Image 24
Epson RC170 manual Program Execution Screen