Adjusting the Image Quality
Adjusting Computer Images and RGB Video Images
Automatic Setup
Automatic setup detects analog RGB signals coming from a connected computer, and automatically adjusts these signals so that the optimum images can be obtained.
Automatic setup involves adjustment of the following three items: Trackingg, Position, and Sync (synchronisation)g.
If “Auto Setup” in the “Signal” menu is set to “OFF,” automatic setup is not carried out. In this case, press the [Auto] button on the remote control or the [Enter] button on the projector’s control panel to make the adjustment while computer or RGB video images are being projected.
Remote control | Control panel |
• If you press the [Auto] button on the remote control, or the [Enter] button on the control panel, while performing other functions such as
•Sometimes the signals may not be adjusted correctly depending on the type of computer or RGB video signals being input. In such cases, use the configuration menu commands to adjust the tracking and sync settings manually. sp.15
14
Adjusting the Tracking
If vertical stripes appear in the projected computer or RGB video images, and this cannot be fixed using automatic setup, you will need to adjust the Trackingg manually using the following procedure.
PROCEDURE
A Select “Signal” from the configuration menu, and then select “Tracking.”
For details on this operation, refer to “Using the Configuration Menu.” sp.34
Check the buttons you can use and the operations they perform in the guide at the bottom of the screen.
Remote control | Control panel |