Maintenance

Resetting the Lamp Operating Time

The projector has a built-in counter which keeps track of the lamp operating time. When the cumulative operating time reaches a certain point, it causes the replacement warning message to be displayed. Therefore, the counter needs to be reset after the lamp has been replaced with a new one. You can do this using the configuration menu.

Do not reset the lamp operating time except after the lamp has been replaced, otherwise the lamp replacement period will not be indicated correctly.

PROCEDURE

A Connect the power cable and turn on the projector.

64

B Select “Reset” from the configuration menu, and then select “Lamp-Hours reset.”

For details on this operation, refer to “Using the Configuration Menu.” sp.34

Check the buttons you can use, and the operations they perform, in the guide at the bottom of the screen.

Remote control

Control panel

C When “Execute?” appears, select “Yes.”

The lamp operating time will then be reset.