| Problem Solving | 54 |
| ||
|
|
|
Problems when projection starts
Power does not turn on
Check | Remedy |
|
|
Have you pressed the [Power] button? | Press the [Power] button to turn the power on. |
|
|
Are all of the indicators switched off? | The power cable is not connected correctly or power is not being supplied. Connect the power cable to |
| the projector correctly. (See the Quick Setup sheet) |
| Alternatively, check the circuit breaker to see if power is being supplied. |
|
|
Do the indicators turn off and on when the | There is probably a poor contact in the power cable, or the power cable may be defective. Reinsert the |
power cable is touched? | power cable. If this does not solve the problem, stop using the projector, disconnect the power cable from |
| the wall outlet and contact Epson. sp.56 |
|
|
Other problems
No sound can be heard or the sound is faint
Check | Remedy |
|
|
Is the audio source connected correctly? | Check that the cable is connected to the Audio port. |
|
|
Has the volume been adjusted to the | Adjust the volume so that sound can be heard. sp.19 |
minimum setting? |
|
|
|
Is A/V Mute mode active? | Press the [A/V Mute] button on the remote control to cancel the A/V mute function. sp.22 |
|
|