Adjusting the Image Quality
B Adjust the tracking until the vertical stripes disappear from the image.
Remote control | Control panel |
The tracking value increases or decreases each time a button is pressed.
C Pressmenu.the [Menu] button to exit the configuration
The image will flash during continuous tracking adjustment.
15
Adjusting the Sync
If flickering, fuzziness or interference appear in computer or RGB video images, and this cannot be fixed using automatic setup, you will need to adjust the Sync (synchronisation)g manually using the following procedure.
PROCEDURE
A Select “Signal” from the configuration menu, and then select “Sync.”
For details on this operation, refer to “Using the Configuration Menu.” sp.34
Check the buttons you can use and the operations they perform in the guide at the bottom of the screen.
Remote control | Control panel |