Saving a User's Logo
You can record the image that is currently being projected as a user's logo.
When a user's logo is recorded, the previous user’s logo will be erased.
PROCEDURE
A Project the image you would like to use as the user’s logo, and then display the configuration menu.
Remote control | Control panel |
66
B Select “Extended” from the configuration menu, and then select “User’s Logo.”
For details on this operation, refer to “Using the Configuration Menu.” sp.34
Check which buttons on the remote control or the control panel you can use, and the operations they perform, in the guide at the bottom of the screen.
• If the “User’s Logo Protect” function of “Password Protect” is set to “ON,” a message is displayed and the user's logo cannot be recorded. To record a user's logo, set “User’s Logo Protect” to “OFF” first. sp.30
•If keystone correction, Zoom adjustment, or