| Problem Solving | 53 |
| ||
|
|
|
Image colors are not right
|
| Check | Remedy | |
|
|
|
|
|
Do the input signal settings match the | If a composite videog or | |||
signals from the connected device? | command to select the video signal format. | |||
|
|
|
| “Signal” - “Video Signal” sp.36 |
|
|
|
|
|
Has the image brightness been adjusted | Use the “Brightness” menu command to adjust the brightness. “Image” - “Brightness” sp.35 | |||
correctly? |
| |||
|
|
|
|
|
Are the cables connected correctly? | Check that all of the cables required for projection are securely connected. (See the Quick Setup sheet.) | |||
|
|
|
|
|
Has the image contrastg been adjusted | Use the “Contrast” menu command to adjust the contrast. “Image” - “Contrast” sp.35 | |||
correctly? |
| |||
|
|
|
|
|
Has the color been adjusted correctly? | Use the “Color Adjustment” menu command to adjust the color. “Image” - “Color Adjustment” sp.35 | |||
|
|
|
|
|
Have the color intensity and tint been | Use the “Color Intensity” and “Tint” menu commands to adjust the color and tint. “Image” - “Color | |||
adjusted correctly? | Intensity,” “Tint” sp.35 | |||
|
|
|
| |
|
| Only when projecting images |
|
|
|
| from a video source |
|
|
|
|
|
|
|
|
|
|
|
|
| Images appear dark |
| ||
|
| |||
|
| |||
|
|
|
|
|
|
| Check | Remedy | |
|
|
|
|
|
Have the image brightness and luminance | Use the “Brightness” and “Brightness Control” menu commands to adjust the brightness and luminance. | |||
been adjusted correctly? | “Image” - “Brightness” sp.35 “Settings” - “Brightness Control” sp.37 | |||
|
|
|
|
|
Has the image contrastg been adjusted | Use the “Contrast” menu command to adjust the contrast. “Image” - "Contrast" sp.35 | |||
correctly? |
| |||
|
|
|
|
|
Is the lamp due for replacement? | When the lamp is nearly due for replacement, the images will become darker and the color quality will | |||
|
|
|
| become poorer. When this happens, the lamp should be replaced with a new one. sp.61 |
|
|
|
|
|
Nothing appears on the external monitor
Check | Remedy |
|
|
Are images from a port other than the The only images that can be displayed on an external monitor are those from the Computer port. You
Computer port being projected?cannot output video equipment images to an external monitor. sp.68