Maintenance
PROCEDURE
A After you turn off the projector’s power, and the confirmation buzzer beeps twice, disconnect the power cable.
62
C Loosen the two lamp screws.
Loosen the two lamp screws with the screwdriver that is supplied with the spare lamp (or your own cross head [Phillips] screwdriver).
B Wait until the lamp has cooled down, then remove the lamp cover from the base of the projector.
Loosen the lamp cover screw with the screwdriver that is supplied with the spare lamp (or your own cross head [Phillips] screwdriver).
Then slide the lamp cover straight forward and lift it to remove.
D Take out the lamp.
Hold the lamp as shown in the illustration below and lift it up and out of the projector.
If the lamp is broken, replace it with a new lamp, or contact your local dealer for further advice. If replacing the lamp yourself, be careful to avoid pieces of broken glass.