| List of Functions | 38 |
| ||
|
|
|
“Extended” Menu
Function | |
Display | This lets you make settings related to the projector’s display. |
| Message: |
| Sets whether the input source name or color mode name or a message is displayed on the screen (“ON”) or not displayed (“OFF”) at times such |
| as when the input source or color mode is changed or when no image signals are being input. |
| Background Color: |
| Sets the screen status when the [A/V Mute] button on the remote control is being pressed or when no image signals are being input to “Black,” |
| “Blue,” or “Logo.” |
| Startup Screen: |
| The startup screen (the image projected when starting the projector) is displayed when starting (ON)/ or not displayed when starting (OFF). |
| The setting is enabled after turning the power supply off and then back on. |
|
|
User’s Logo | Change the user’s logo that is displayed as a background and displayed during A/V Mute. sp.66 |
|
|
Projection | Sets the projection position. sp.58 |
| Front, Front / Ceiling, Rear, Rear / Ceiling |
| By holding down the [A/V Mute] button for about 5 seconds, you can change the projection setup. |
|
|