Adjusting the Projection Position (Image Shift) | 18 |
|
When you cannot setup the projector directly in front of the screen, the projection position can be moved without moving the projector.
Remote control | Control panel |
PROCEDURE
A Using the buttons on the projector, perform zoom adjustment or keystone correction.
The Image Shift adjustment screen is displayed after you finish making adjustments.
B Adjust projection position.
C Pressscreen.the [Esc] button to close the adjustment
The screen closes automatically if no buttons are pressed for about 10 seconds.
• The projection position cannot be adjusted when zoom is set to the maximum “wide” position.
• Even if you turn the power supply off, the “Image Shift” settings you make are kept. When either the projector position or the angle of the projector is changed, you can readjust or perform the following operations.
Control panel
Press and hold down the [Wide] and [Tele] buttons for more than one second.
•You can also make adjustments from the configuration menu. sp.35