| Problem Solving | 50 |
| ||
|
|
|
The message “Not Supported.” is displayed
|
|
| Check | Remedy | |||
|
|
|
|
|
|
|
|
Are the image signal format settings | If a composite videog or | ||||||
correct? | command to select the signal format. “Signal” - “Video Signal” sp.36 | ||||||
|
|
|
|
|
|
| |
|
|
| Only when projecting images |
|
|
|
|
|
|
| from a video source |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Does the mode match the frequency and | Refer to the documentation provided with your computer for details on changing the resolution and | ||||||
resolution of the image signals? | frequency of the image signals being output from the computer. | ||||||
|
|
|
|
|
|
| “List of Supported Monitor Displays” sp.73 |
| Only when projecting computer images |
| |||||
|
|
| |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| The message “No Signal.” is displayed |
| |||||
|
| ||||||
|
| ||||||
|
|
|
|
|
|
|
|
|
|
| Check | Remedy | |||
|
|
|
|
|
|
|
|
Are the cables connected correctly? | Check that all of the cables required for projection are securely connected. (See the Quick Setup sheet) | ||||||
|
|
|
|
|
|
|
|
Has the correct video input port been | Press the [Computer], | ||||||
selected? | on the remote control or the projector's control panel to change the image. sp.20 | ||||||
|
|
|
|
|
|
|
|
Is the power for the computer or video | Turn the power on for the devices. | ||||||
source turned on? |
| ||||||
|
|
|
|
|
|
|
|
Are the image signals being output to the | If the image signals are only being output to the computer’s LCD monitor or to the accessory monitor, | ||||||
projector? | you need to change the output to an external destination as well as the computer's own monitor. For some | ||||||
|
|
|
|
|
|
| computer models, when the image signals are output externally, they no longer appear on the LCD |
|
| Only when projecting images from |
|
| |||
|
|
| monitor or accessory monitor. | ||||
|
| a laptop computer or computer |
| (See your computer documentation, under a title such as “External output” or “Connecting an external | |||
|
| with a |
| monitor”) | |||
|
|
|
|
|
|
| If the connection is made while the power is already turned on, the function [Fn] key that switches the |
|
|
|
|
|
|
| |
|
|
|
|
|
|
| computer's video signal to external output may not work. Turn the power for the projector and the |
|
|
|
|
|
|
| computer off and then back on again. (See the Quick Setup sheet) |
|
|
|
|
|
|
|
|