16 Introduction
Caution: Always turn the printer off using the
PPower button. When you press this button, POWER OFF appears on the LCD panel and the
PPower light flashes. Do not unplug the printer or turn off the power to the printer until the panel shuts off and the
PPower light stops flashing. This ensures that the print head is safely capped.
•If you use an extension cord with the printer, make sure the total ampere rating of devices plugged into the extension cord does not exceed the cord’s ampere rating. Also, make sure the total ampere rating of all devices plugged into the wall outlet does not exceed the wall outlet’s ampere rating.
•Do not block or cover the openings in the printer’s case.
•Do not put your hand inside the printer during printing.
•Do not move the print head by hand unless instructed to do so by an Epson service technician; otherwise you may damage the printer.
•Do not insert objects through the slots. Take care not to spill liquid on the printer.
•Do not attempt to service the printer yourself.
•Power down the printer from the control panel, unplug the printer, and refer servicing to qualified service personnel under the following conditions:
The power cord or plug is damaged; liquid has entered the printer; the printer has been dropped or the cabinet damaged; the printer does not operate normally or exhibits a distinct change in performance.
•Before transporting the printer, make sure the print head is in the far right (home) position.
For California customers only:
The lithium batteries in this product contain
Perchlorate Material - special handling may apply,
See www.dtsc.ca.gov/hazardouswaste/perchlorate.