Solving Problems 181

 

 

 

 

 

 

 

Message

 

Explanation

Response

 

 

 

 

 

 

NOT ENOUGH EMPTY

The maintenance tank is too

Replace the maintenance tank; see

SPACE

 

full for head cleaning.

page 169.

 

REPLACE THE RIGHT SIDE

 

 

 

MAINTENANCE TANK

 

 

 

 

 

 

 

 

NOZZLE CHECK ERROR

Auto cleaning cannot be

Press the button to clear the error, then try

PRESS THE

 

 

BUTTON

performed.

cleaning again. If necessary, cancel cleaning

 

 

 

 

 

from the computer, then restart the printer.

 

 

 

 

 

 

 

 

 

 

NOZZLE CLOG DETECTED

Not enough ink or maintenance

Select YES, then follow the instructions to

NOT ENOUGH INK OR

tank capacity for head cleaning.

replace the ink cartridge or maintenance

 

tank.

 

SPACE IN MAINT TANK

 

 

 

 

 

 

 

 

 

 

 

PAPER CUT ERROR

Roll paper was not cut

Press the

button and open the front

REMOVE UNCUT PAPER

correctly.

cover. Remove the uncut paper.

 

 

 

 

 

 

 

The cutter may be blunt or

Reinstall or replace the cutter if necessary;

 

 

 

 

incorrectly installed.

see page 165.

 

 

 

 

 

 

PAPER EJECT ERROR

Roll paper is used with the cut

Press the

button and remove the paper.

REMOVE PAPER FROM

sheet setting.

 

 

 

 

 

PRINTER

 

 

 

 

 

 

 

 

 

 

 

PAPER ERROR

 

Paper is not loaded correctly.

Press the

button, then reload paper

LOAD PAPER CORRECTLY

 

correctly.

 

 

 

 

 

 

 

 

 

 

 

PAPER JAM

 

Paper has jammed in the

Press the

button and remove the

REMOVE PAPER

 

printer.

jammed paper; see page 191 for more

 

 

information.

 

 

 

 

 

 

 

 

 

 

 

 

 

PAPER LOW

 

The paper roll is almost

Replace the roll.

 

 

 

 

finished.

 

 

PAPER OUT

LOAD PAPER

No paper is loaded.

Load paper.

 

 

 

 

 

The

button has been

Press the

button, then load paper.

pressed with no paper loaded.

 

 

 

 

 

Paper ran out during printing.

Press the

button and remove the roll

 

 

paper core. Then load another roll.

PAPER RELEASED

The

button has been

Load paper, then press the

button.

LOAD PAPER

 

pressed.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PAPER SENSOR ERROR

The paper is not detected.

Press the

 

button to clear the error,

 

PRESS THE

 

BUTTON

 

 

then select the right paper.

 

 

 

 

 

 

 

 

 

 

 

 

LOAD DIFFERENT PAPER