62 Handling Paper and Other Media
Tip: You can use Maintenance mode to switch the units of measurement in the printer from meters to feet. See page 164 for instructions.
6.Press u to go back to REMAINING PPR SETUP.
7.Press d to select ROLL PAPER LENGTH.
8.Press r, then select the length of the roll paper loaded in the printer, from 15 to 300 ft (5 to 99.5 m), then press OK.
9.Press l, then press d to select ROLL LENGTH ALERT.
10.Press r, then select the length at which you want to receive an alert message, from 3 to 50 ft (1 to 15 m), then press OK.
11.Press 
to exit the menu.
Placing the Paper in the Printer
1. Open the roll paper cover.