| Solving Problems 183 |
| If none of these suggestions help, try the solutions in the following table. |
|
|
Problem | Solution |
|
|
Your print has horizontal | ◗ Check the ink indicators and light to see if you are low on ink. (If you replace |
banding. | ink cartridges with the printer turned off, the ink indicators will not be |
| accurate.) Replace ink cartridges if necessary, as described on page 159. |
| ◗ Run a nozzle check and cleaning cycle. See page 154 for instructions. |
| ◗ Turn off the High Speed setting. |
| ◗ Make sure the Media Type setting in the printer software is correct. |
| ◗ If you’re using cut sheet media, make sure the printable side is face up. |
| ◗ Choose a higher resolution, such as SuperPhoto - 2880x1440dpi. |
| ◗ If you’re using a |
| a method for adjusting the paper feed. |
|
|
| Try adjusting your advanced media control settings (page 97) or paper |
| configuration settings (page 113 for Mac OS X or page 141 for Windows). |
| Check these settings: |
| ◗ Make sure the Paper Thickness setting is correct for your paper. |
| ◗ Use the Paper Feed Adjustment to tune out banding. Reduce the value for |
| white lines, and increase it for overlapping dark lines. |
| ◗ If you’ve created a custom paper configuration, be sure to return the setting |
| to standard (STD) when you’re done using it. See page 83. |
|
|
Your print has vertical | ◗ Turn off the High Speed setting. |
banding. | ◗ Align the print head; see page 158. |
| |
|
|