|
|
|
|
| Solving Problems 179 | ||
|
|
|
|
|
|
|
|
Message | Explanation | Response |
|
|
| ||
|
|
|
|
|
|
| |
CANNOT OPEN INK COVER | Something is obstructing the | Remove the obstruction and press the |
|
| |||
| |||||||
| |||||||
| indicated ink cover | button again. |
|
|
| ||
|
|
|
|
|
|
|
|
CLEANING ERROR | Head cleaning did not clear the | Press |
|
| to clear the error and run the | ||
|
| ||||||
AUTOMATIC HEAD | nozzles. | head cleaning utility again. If cleaning | |||||
|
|
|
|
|
|
|
CLEANING FAILED
doesn’t start, cancel printing from the
RETRY?
computer. Then turn the printer off and back
YES NO
on again.
CLEANING ERROR | Not enough ink or not enough |
NOT ENOUGH INK OR | maintenance tank capacity for |
SPACE IN MAINT TANK. | head cleaning. |
CONTINUE CLEANING? |
|
YES (RECOMMENDED) |
|
NO |
|
COMMAND ERROR
CHECK DRIVER SETTINGS
You may be using the wrong printer driver.
Damaged data was sent to the printer or the data has an incorrect command.
Press the Pause/reset button to cancel the print job and reset the printer. Make sure you installed the correct driver for your printer.
CUTTER UNIT NEARING | The paper cutter may be dull. | Replace the paper cutter; see page 165. |
END OF SERVICE LIFE. |
|
|
RECOMMEND REPLACING |
|
|
THE CUTTER UNIT |
|
|
|
|
|
FRONT COVER OPEN | Front cover is open. | Close the front cover. |
CLOSE COVER |
|
|
|
|
|
F/W INSTALL ERROR | Firmware update failed. | Restart the printer, then update the |
UPDATE FAILED RESTART |
| firmware again; see page 54. |
|
| |
THE PRINTER |
|
|
|
|
|
INK CARTRIDGE | The ink cartridge is expended. | Replace the ink cartridge; see page 159. |
INK LOW REPLACE INK |
|
|
CARTRIDGE |
|
|
|
|
|
INK CARTRIDGE | A | Select DECLINE and replace the ink |
installed. | cartridge with a genuine Epson ink cartridge; | |
QUALITY OF |
| see page 159. |
|
|
INK MAY VARY.
INK CARTRIDGE | A |
PLEASE USE GENUINE | installed. |
| |
EPSON INK CARTRIDGES |
|
Replace the ink cartridge with a genuine Epson ink cartridge; see page 159.