Epson SP7900HDR Chapter 1:, Setting Up, the Printer, Unpacking and Assembling the Printer

21

Chapter 1:

Setting Up

the Printer

This chapter includes the following information:

•Unpacking and assembling the Pro 7900 and Pro 9900

•Connecting the power cord

•Installing ink

•Connecting to your computer and a network

•Installing the printer software for Macintosh or Windows

•Updating the printer firmware

•Configuring the printer for a network

WARNING: Four people are required to unpack and set up the printer.

Note: When choosing a place for the printer, leave adequate room for easy access and ventilation. Avoid locations subject to direct sunlight, excessive heat, moisture, or dust. Also avoid locations near potential sources of electromagnetic interference, such as loudspeakers, cordless phones, TVs, or air conditioners.

Unpacking and Assembling the Printer

Follow these steps to assemble your printer and its stand.

Before you begin, make sure you have sufficient space to set up and use the printer—at least 12 inches on all sides in addition to the dimensions shown:

•53.4 × 35.6 inches (1356 × 903 mm) for the Epson Stylus Pro 7900

•73.4 × 52 inches (1864 × 1318 mm) for the Epson Stylus Pro 9900