Note: With Windows XP, if you see a Found New Hardware Wizard screen, select No, not this time, click Next, and click Next again.
Setting Up the Printer 53
5. Click your printer model. You see a screen like this:
6.Click the Install button.
7.When you see a screen asking you to turn on the printer, press the printer’s PPower button. (Make sure the printer is connected; see page 48.)
For network connection, click the Manual button, select the port you created for the printer, and click OK.
If you didn’t create a port for the printer, select FILE.
8.When you see the final installation screen, click Exit.
9.Register your printer with Epson, then remove the printer software
10.If you need to create a port, see the
Go to the next section to update the printer firmware, if necessary.