190 Solving Problems

Fixing Paper Eject Problems

If the paper is curled too tightly to eject properly, make sure the paper guides are attached to the printer. There are two paper guides for the Epson Stylus Pro 7900 and five for the Pro 9900.

Attach the guides to the bottom of the printer as shown:

Note: If banding appears on your print, leave the paper guides in the forward position.

Epson Stylus Pro 7900

Epson Stylus Pro 9900

Do one of the following:

If you are feeding paper in front of the printer, move the guides to the forward position.

If you are feeding paper backward (under the printer), gently squeeze the paper guides and push them to the backward position, as shown

below: