Normal cut

Double cut

Single cut

Note: These settings override settings made through the control panel.

Printing With Epson Drivers for Macintosh 99

2.Choose one of the following Auto Cut Settings:

•Normal Cut allows margin space at the top and bottom of each image.

•Double Cut extends the space between the images and trims each print individually. This provides the cleanest edge for borderless printing.

•Single Cut allows images to be printed end-to-end and saves paper. With borderless printing, you may see a sliver of the previous or next image if you print multiple images in one print job. You will see a white margin between print jobs.

•Off disables automatic cutting. Choose this setting if you want to operate the cutter manually, use the optional Auto Take-Up Reel, or print multiple print jobs without cutting.

See page 70 for instructions on using the button to operate the cutter.

3.Select the following options, if desired:

•Auto Rotate saves paper if your document length is shorter than the printable width of the roll. The document is automatically rotated 90 degrees and printed crosswise. When this option is checked, be sure to select the width of your roll paper from the drop-down menu.

•Print Page Line prints trim lines on the right and bottom edges of your pages.

•Save Roll Paper saves paper by not feeding the blank portion of the last page of your document (available only when you’ve selected a Paper Size setting with the Roll Paper - Banner option).