Eton E10 operation manual Clock and Timer Features Working with Memory

E 1 0 O P E R AT I O N M A N U A L

CLOCK AND TIMER FEATURES continued

WORKING WITH MEMORY continued

ACTIVATING/DEACTIVATING THE TIMER

For a timer to turn on the radio, it must be activated. A timer can be activated/deactivated with the radio on or off. To activate the timer, press/release the TIMER A or TIMER B button. The timer symbol will appear in the display. To deactivate a timer, press/release the TIMER A or TIMER B button. The timer symbol will disappear from the display.

USING THE SNOOZE FEATURE

When the timer activates and turns the radio on, the timer activation symbol (39) appears flashing in the display. While it is flashing, press/release the SNOOZE/LIGHT button (7). The radio will turn off and then turn on again in 10 minutes. This process can be repeated 3 times.

ACCESSING WHAT IS STORED INTO MEMORY

There are three ways to access what has been stored into memory: Direct Memory Access, Manual Memory Search and Memory Auto-scan. These three methods are described below. When the memory page and memory preset numbers appear in the upper right corner of the display, as it will in the descriptions below, the radio is in MEMORY ACCESS MODE. This mode can be exited any time

MEMORY AUTO-SCAN

Memory Auto-scan enables scanning through the memories within the selected memory page. Each filled memory is accessed for about 5 seconds, after which the scan move on to the next used memory automatically, staying on it for about 5 seconds. This continues indefinitely on the selected page until deliberately stopped. Unused memories are not accessed.

8WORKING WITH MEMORY

with a press/release of the SCAN MODE button (12).

1.	Press/release SCAN MODE (12) button.
2.	Press/hold either the Up/Hour or Down/Min.

At the factory, the E10 is set up with 10 pages of memory, each page holding 50 frequencies. This enables storing of 500 frequencies into memory. This factory setting can be changed and tailored to your personal needs or can be left as-is. When first learning to store stations into memory, we suggest using the factory setting. To change the factory setting, see the section CUSTOMIZING MEMORY PAGES. When working with memory, the term

4.Within 5 seconds use the numeric keypad to enter the memory number that you wish to store the station into. For memories 1-9, enter the numbers as 01 – 09.

5.Within 5 seconds press the MEMORY button, or wait 5 seconds. This finalizes storing into memory and after a few seconds, the upper right corner’s display returns to showing the clock.

If you first need to change memory pages, see the previous section, SELECTING/CHANGING MEMORY PAGES.

DIRECT MEMORY ACCESS

Use the numeric keypad to key-in the memory number. For example, if the desired radio station is in memory number 01, just press ‘0’, then ‘1’, and it will go to memory 01.

button for about a second. Then release it. Note

that PRESET flashes under the memory number,

indicating that memory scanning is functioning

with each memory being scanned for about 4

seconds. It then moves on to the next memory

for another 4 seconds.

To stop memory preset auto-scan, press/release either the Up/Hour or Down/Min. button.

DELETING A MEMORY’S

PRESET appears in the display under the memory numbers.

STORING STATIONS INTO MEMORY

1.Turn on the radio.

2.Tune to the desired station.

3.Press/release the MEMORY button (18). Note that the memory number digits, labeled PRESET

(48)flash in the upper right corner of the dis- play. The memory page number, labeled PAGE, also appears, but does not flash.

SELECTING/CHANGING

MEMORY PAGES

To select/change memory pages:

1.Press/release the PAGE button (11). The page number flashes in the display.

2.Within three seconds, use either the UP/HOUR- DOWN/MIN button to change to the page of your choice. Alternately, use the numeric keypad to enter the page.

3.Press/release the PAGE button to finalize the page change.

MANUAL MEMORY SEARCH

Manual Memory Search enables manual searching through the memories within a memory page, as shown below:

1.Press/release the SCAN MODE (12) button.

2.Use quick, short presses on the Up/Hour- Down/Min. buttons or use the tuning knob to search through the memories.

3.Press the SCAN MODE button when finished.

CONTENTS

1.Press/release the SCAN MODE button (12).

2.Use the Up/Hour or Down/Min. button (5,6) to select the memory preset location of the fre- quency that you wish to delete. Alternately, use the numeric keypad to enter the memory number.

3.Press/hold the MEMORY button (18) for about 2 seconds and then release it. ‘dEL’ appears flashing in the display.

4.While ‘del’ is still flashing, press/release the MEMORY button.

14 15