times, you would need to enable it. Web (HTTP) server is on LAN (Local Area Network) computer 192.168.1.10 HTTP uses port 80, TCP and UDP.
Protocol Type - The protocol used for the virtual service.
Public Ports - The port number on the WAN (Wide Area Network) side that will be used to access the virtual service.
Schedule - The schedule of time when the virtual service will be enabled.
The schedule may be set to Always, which will allow the particular service to always be enabled. If it is set to Time, select the time frame for the service to be enabled. If the system time is outside of the scheduled time, the service will be disabled.
The next step is to open ports within your router. Open virtual ports in the router.
oEDR Ports to open: 80, 1600, 1601, 1602, 1603, 37260, 37261, 37262, 37263
Note: If your Internet service provider blocks port 80 and you are using a different port to access the DVR through the DVR’s Network Menu Setup please open those specific ports in this section of the router.
Note: If you wish to have multiple users log into the DVR please open a range for the control and data ports on your router. For example if you would only like 4 clients to connect to the DVR open
If your Internet Service Provider Blocks port 80. Simply do the following:
oChange the HTTP port from 80 to 8100 in the NETWORK MENU.
To access the DVR from a computer simply open Internet Explorer and in the address bar type:
The following is the address you would type:
http:// (IP address of your internet service provider): 8100
