1.5Monitor Display
The status information of the cameras or machine will show up, and be located at different places on the screen.
1. Channel tag
2. Event sign
3. Select sign
4. Play status bar
5. Record status bar
1.Channel tag: A channel tag indicates the channel name of the screen.
2.Event sign: Event signals which are small icons with a capital letter and red background show the events on each screen. There are a total of 6 different signals:
A
M
V
Alarm event. In order to show the camera video to a corresponding alarm, setting a FOCUS CAMERA in ALARM SETUP MENU is necessary.
Motion event. Motion event only shows up when the camera’s MOTION is enabled in MOTION SETUP MENU, and the camera detects a motion.
Video loss event. Video loss event only shows when the camera’s VIDEOLOSS is enabled in VIDEOLOSS SETUP MENU, and the camera signal is lost.
S
Sequence sign. Sequence sign shows up when the display is in the sequence mode. The last display on the screen has a “*” sign in the
Ssign will replace the “*” in the display when sequence occurs.
Note: Sequence is invalid when all cameras are showing.
10
