EverFocus ESM316T002R user manual Priority to Queue Mapping Setting, Hint§

Priority to Queue Mapping Setting

The QoS technique known as class of service (CoS), is a 3-bit field within an Ethernet frame header when using tagged frames on an 802.1 network. So up to eight separate traffic priorities are defined in IEEE 802.1p. Always can map the priority levels to the switch’s output queues in any way that benefits application traffic for our own network.

Web Smart switch interface

To configure port-level DSCP remarking,

1.Click Configuration, QoS, Priority to Queue Mapping.

2.Map one or more priority values to a queue ID.

3.Click Apply.

Figure 22: Priority to Queue Mapping Setting

Hint§

The following parameters are shown on the DSCP-based Priority Setting page:

■Priority - CoS value. (Range: 0-7, where 7 is the highest priority)

■Queue ID - Output queue buffer. (Range: 1-8, where 8 is the highest priority queue)

31