Manuals / Extron electronic / Home Audio / Speaker

Extron electronic CS 1226T, CS 26T manual Installing the CS 120P in a Hard Ceiling

Models: CS 1226T CS 26T CS 120P

1 33

Download 33 pages 50.04 Kb

Page 32

Installing the CS 120P in a Hard Ceiling

Installing the CS 120P in a Hard Ceiling

If you are installing the CS 1226T in a hard ceiling (having no ceiling tiles), with the ceiling structure in place, install the CS 120P:

•It is the responsibility of the installer to identify a suitable mounting location and provide the mounting hardware.

•The CS 120P must be mounted as close as possible to the upper surface of the ceiling material.

•The lip of the CS 120P should protrude into the hole cut for the speaker.

•Do not leave a gap between the CS 120P and the ceiling material.

NOTE: Installation in this type of ceiling must be done while access to the ceiling is

still possible.

CS 26T and CS 120P User Guide • Installation 26

Image 32

Extron electronic CS 1226T, CS 26T manual Installing the CS 120P in a Hard Ceiling

Contents

CS 26T and CS 120P User GuideSpeakers CS 1226T SpeedMount Ceiling Speaker SystemSafety Instructions Safety Instructions EnglishChinese Simplified（简体中文） Instructions de sécurité FrançaisFCC Class A Notice Guide” on the Extron websiteCopyright TrademarksNotifications Specifications AvailabilityConventions Used in this Guide Contents CS 26T and CS 120P User Guide Contents Features About this Guide Overview FeaturesIntroduction About this GuideApplication Example Extron CS 1226TInstallation Installation ConsiderationsInstallation Configurations Installation ConsiderationsInstalling the CS 1226T System - Single Installer Figure 3. Install the Ceiling Mount Kit Using a flexible conduit 8.Route the cables through the cover plateedges Figure 11. Configuring the Bass Reflex Port Plate Number of Wires per Connection Point Maximum Wire GaugeFigure 12. Wiring a Single Speaker Figure 13. Wiring Multiple Speakers in ParallelWiring Multiple Speakers Using Loop-through Red Wire + from Ampliﬁer Black Wire -from Ampliﬁer2 by 4 Ceiling Tile 4 Pole Connector Ampliﬁer19.Mount the CS 26T see figure Figure 21. Attaching Secondary Support Lines Figure 22. Adjusting the Rotary Tap Selector Figure 23. Installing the Speaker GrilleFigure 24. Grid Face Example Figure 26. Removing the Cover Plate Using a flexible conduit Using speaker wires without a conduit7.Route the cables through the cover plate Figure 28. Routing the Cables Without a Conduitedges Figure 32. Attaching Secondary Support Lines CS 120P Number of Wires per Maximum WireFigure 33. Wiring a Single Speaker Figure 34. Wiring Multiple Speakers in ParallelWiring Multiple Speakers Using Loop-through Figure 38. Impedance Test Points - Loop-throughConfiguration 8.Mount the CS 26T see figure Figure 42. Adjusting the Rotary Tap Selector Figure 43. Installing the Speaker GrilleInstalling the CS 120P in a Hard Ceiling Extron Warranty