Extron electronic Operation, cont’d, GSS 100 Graphic Still Store Operation, Switch Effect menu

Operation, cont’d

Adjust/Select knob — When in a submenu, rotate the Adjust/Select knob to scroll through the submenu options and select a setting. See the flowcharts in this chapter and specific sections for explanations of knob adjustments.

NTo return to the default screens, let the GSS remain idle for 10 seconds until the selected screen times out, or press the Menu button until the Exit Menu appears, then press the Next button.

NFrom any menu or submenu, after 10 seconds of inactivity, the GSS saves all adjustment settings and times out to the default LCD display cycle.

The GSS saves settings to its non-volatile memory every three minutes. Ensure that you wait at least three minutes after making any changes or those changes may be lost.

Switch Effect menu

Figure 3-7 is a flowchart that shows an overview of the Switch Effect menu and the available settings.

Power Default

on Cycle

Duration submenu

Rotate the Adjust/Select knob while in the Duration submenu to select the duration for the dissolve effect (if it is selected), between 0.0 and 5.0 seconds in 0.1 second increments. The default duration is 1.0 seconds.

Output Configuration menu

Figure 3-8 is a flowchart that shows an overview of the Output Configuration menu and the available settings.

NThe Output Configuration menu settings apply only to the output of still images stored in the GSS; the RGB Pass-through video is output exactly as it is input.

Resolution submenu

Rotate the Adjust/Select knob while in the Resolution submenu to select the resolution of the stored image output. 1024 x 768 at 60 Hz is the default resolution.

NTo view an uncropped full screen image at 1080p or 1080i, the image resolution must be 1440 x 1080.

Power Default

on Cycle

Menu 10 sec. Menu 10 sec.

	Menu
10
sec.	Switch
	Effect
10	Menu
sec.	Output
	Config
10	Menu
sec.	Slide
	Show
10	Menu
sec.	Advanced
	Menu
10	Menu
sec.	Exit
Menu
	Menu

	Menu		10 sec.	Menu	10 sec.
Next		Effect	Next	Duration	Next
		Cut		0.0 Secs
Output transition				Dissolve duration
•	Cut	• Dissolve		0.0 to 5.0 seconds in
				0.1 second increments.

	Menu
10
sec.	Switch
	Effect
10	Menu
sec.	Output
	Config
10	Menu
sec.	Slide
	Show
10	Menu
sec.	Advanced
	Menu
10	Menu
sec.	Exit
Menu
	Menu

	1024 x		Next		Sync Next
	768 @60				RGBHV
	Resolution			Output sync format
Next	See the table			• RGBHV • RGBS
	on page 3-8.
	Menu		10 sec.		Menu	10 sec.
	H Pol V				RGB Dly	Next
	Neg Neg				0.0 Sec
	Sync polarity				Cut duration
	• H-/V-	•	H+/V-	0.0 to 5.0 seconds in
	• H-/V+	• H+/V+		0.1 second increments.

Figure 3-7 — Switch Effect menu flowchart

Effect submenu

Rotate the Adjust/Select knob while in the Effect submenu to cut (immediate switch) and dissolve (the image dissolves from old to new). Cut is the default selection.

Figure 3-8 — Output Configuration submenu

3-6 GSS 100 Graphic Still Store • Operation GSS 100 Graphic Still Store • Operation 3-7