Extron electronic GSS 100 user manual IP setup commands, EX3%CX

4-18 GSS 100 Graphic Still Store • SIS™ Control

Command/response table for IP SIS commands

Command	ASCII Command	Response	Additional description
	(host to switcher)	(switcher to host)
IP setup commands
Set device name (location)	EX3)CN}	Ipn•X3)]
Read device name (location)	ECN}	X3)]
Reset device name to factory default	E•CN}	Ipn•X3!]
Set time and date	EX3@CT}	IptX3@]
Read time and date	ECT}	X3#]
Set GMT offset	EX3$CZ}	IpzX3$]	The divider between hours and minutes is a
			period.
Read GMT offset	ECZ}	X3$]
Set Daylight Savings Time	EX3%CX}	IpxX3%]	Set the GSS to display the local time as Daylight
			Savings Time (+1 hour) in summer months.
Read Daylight Savings Time	ECX}	X3%]
Set IP address	EX3^CI}	IpiX3^]
Read IP address	ECI}	X3^]
Read hardware address	ECH}	X3&]
Read # of open connections	ECC}	X3*]
Set subnet mask	EX3^CS}	IpsX3^]
Read subnet mask	ECS}	X3^]
Set gateway IP address	EX3^CG}	IpgX3^]
Read gateway address	ECG}	X3^]
Set administrator password	EX3(CA}	Ipa•X3(]
Read administrator password	ECA}	X3(]
Reset (clear) administrator password	E•CA}	Ipa•]

SIS™ Control, cont’d

GSS 100 Graphic Still Store • SIS™ Control 4-19

Command/response table for IP SIS commands (continued)

Command	ASCII Command	Response	Additional description
	(host to switcher)	(switcher to host)
IP setup commands (continued)
Set user password	EX3(CU}	Ipu]
Read user password	ECU}	X3(]
Reset (clear) user password	E•CU}	Ipu•]
Set DHCP on or off	EX4)DH}	IdhX4)]
Read DHCP status	EDH}	X4)]
Configure serial port parameters	EX4!*X4@,X4#,X4$,X4%CP}
		CpnX4!•CcpX4@,X4#,X4$,X4%]
Read serial port parameters	EX4!CP}	X4@,X4#,X4$,X4%]
Set verbose mode	EX4^CV}	VrbX4^]
Read verbose mode	ECV}	X4^]
Email
Set mail server and domaine name	EX3^,X4&CM}	Ipm•X3^,X4&]
Read mail server and domain name	ECM}	X3^,X4&]
Set email events	EX4*,X4(,X5)CR} IprX4*,X4(,X5)]
Read email events	EX4*CR}	X4(,X5)]
Send email event	EX4*SM}	EmlX4*]