Extron electronic GSS 100 Video Settings Page, Date/Time Settings fields, Subnet Mask field

HTML Control and IPL File Manager, cont’d

Gateway IP Address field

NThis field is grayed out and uneditable if DHCP is on.

The Gateway IP Address field identifies the address of the gateway to the server that is to be used if the GSS and the server are not on the same subnet.

The gateway IP address has the same validity rules as the GSS’s IP address. The default is 000.000.000.000.

Click the Submit button to take changes. Click the Cancel button to abandon them.

Subnet Mask field

NThis field is grayed out and uneditable if DHCP is on.

The Subnet Mask field is used to determine whether the GSS is on the same subnet as the GSS’s server when you are subnetting. The default is 255.255.000.000.

Click the Submit button to take changes. Click the Cancel button to abandon them.

MAC Address field

The Media Access Control (MAC) Address is hardcoded in the GSS and cannot be changed.

Date/Time Settings fields

The Date/Time Settings fields provide a location for viewing and setting the time functions.

NIf setting the time, set the local time. The Zone variable allows you to then enter the offset from Greenwich Mean Time (GMT).

NThe Zone field identifies the standard time zone that was selected; and displays the amount of time, in hours and minutes, that the local time varies from the GMT international time reference.

NWhen the daylight savings time feature is turned on, the GSS automatically updates its internal clock between Standard Time and Daylight Savings Time in the spring and fall on the date that the time change occurs in the United States of America, Brazil, or Europe (depending on the radio button selected). When the daylight savings time feature is turned off, the GSS does not adjust its time reference.

Click the Submit button to take changes. Click the Cancel button to abandon them.

Video Settings Page

Access the Video Settings page (figure 5-5) by clicking the Configuration tab and then the Video Settings link on the left side of the System Settings page.

System

Settings

Passwords

Email Alerts

Firmware

Upgrade

Figure 5-5 — Video Settings page

Set the video settings (resolution, refresh rate, sync format, and sync polarity) and RGB delay as follows:

1.	Click the desired field. A drop down scroll box appears
	(figure 5-6).

Figure 5-6 — Output Configuration drop boxes

NThe RGB Delay drop box is shown at the right of the page rather than under the Resolution box for clarity only.

2.	If necessary, click and drag on the slider or click the scroll
	up ( ) or down ( ) button until the desired setting is
	visible.
3.	Click the desired setting.

5-10 GSS 100 Graphic Still Store • HTML Control and IPL File Manager GSS 100 Graphic Still Store • HTML Control and IPL File Manager 5-11