Extron electronic GSS 100 4-13, SIS Control, cont’d, ASCII Command, Response, Still

4-	Command/response table for SIS commands (continued)
12
	Command	ASCII Command	Response	Additional description
		(host to switcher)	(switcher to host)
GSS
	View, information, part number, and firmware requests
100	Information request	I	ChnX@•VmtX@•ExeX@•TypX(]
	Example:	I	Chn0•Vmt0•Exe1•Typ0]
Graphic				Pass-through input is not displayed, video output is not
				muted, panel is locked, no pass-through sync signal is
				detected.
Still	Request user memory usage	4I	X1)•Bytes•Used•out•of•17344•KBytes]
	Example:	4I	1149184•Bytes•Used•out•of•17344•KBytes]
Store				This device has approximately 5850 kBytes of user
				memory available (17344 kBytes - 11491 kBytes) for
				additional stored images and locally-created HTML
•				pages.
SIS™	Request for part number	N	60-684-01]	Display GSS 100 part number.
Control	Query firmwre vesion	Q	X1!]	Firmware version x.xx.

Command/response table for SIS commands (continued)

		Command	ASCII Command	Response	Additional description
			(host to switcher)	(switcher to host)
		Reset
		Erase all files	EZfff}	Zpf]	Reset flash memory (erase user-supplied files). This reset
					does not reset IP settings.
GSS		Master reset	EZxxx}	Zpx]	Resets all user settings to their default values. This reset
					does not reset IP settings or delete loaded image files.
100		Absolute reset	EZqqq}	Zpq]	Resets all device settings to their factory defaults. Erases
					all loaded files. The firmware version remains unchanged.
Graphic		Absolute reset retaining IP	EZY}	Zpy]	Similar to absolute reset (EZqqq), except that IP
					settings; including the IP address, subnet mask, gateway
					address, unit name, DHCP setting, and port mapping
					(Telnet/Web/Direct Access) are excluded. This preserves
Still					communications with the device and is recommended
					after a firmware update..
Store • SIS
	™
Control
4-13

SIS™ Control, cont’d