Extron electronic GSS 100 user manual Quick Start Guide - GSS, Step

Quick Start Guide — GSS 100

Install and operate the GSS 100 Graphic Still Store as follows:

Step 1

Turn all of the equipment off or disconnect it from the power source.

Step 2

Mount the GSS in a rack or furniture, or place it on a desktop.

Step 3

Connect video output cables for RGBHV or RGBS video.

If desired, connect a pass-throughRGBHV or RGBS video input.

RGBHV

RGBS

R	G	B	H/HV	V
R	G	B	H/HV	V

Step 4

Connect an RJ-45 cable between the GSS’s LAN port and a computer or a computer network.

Step 5

If desired, connect the GSS to a control system or control computer via the GSS’s RS-232 port.

Step 6

Apply power to the GSS and the computer and/or computer network.

Step 7

Use the embedded GSS web pages to load *.bmp and/or *.jpg image(s) into the GSS. See chapter 5, HTML Control and IPL File Manager.

Step 8

Select a stored image to display as follows:

a. Press the front panel Image button.

b. Rotate the front panel Adjust/Select knob until the file name of the desired stored image is shown in the LCD display.

c. Press the front panel Take button.

GSS 100 Graphic Still Store • Quick Start Guide QS-31