Extron electronic GSS 100 Html Control and IPL File Manager, cont’d Passwords, Mail Alerts

HTML Control and IPL File Manager, cont’d

Passwords Page

Access the Passwords page (figure 5-7) by clicking the Configuration tab and then the Passwords link on the left side of the System Settings page.

System

Settings

Video Settings

Email Alerts

Firmware

Upgrade

Figure 5-7 — Passwords page

The fields on the Passwords page are for entering and verifying administrator and user passwords. Passwords are case sensitive and are limited to 12 uppercase and/or lowercase alphanumeric characters. Each password must be entered twice; once in the Password field and then again in the Re-enter Password field. Characters in these fields are masked (•••••). If you do not

want to password protect an access level, leave the Password field and the Re-Enter Password field blank. All changes made on the Port Settings must be confirmed by clicking the Submit button. Clicking the Cancel button abandons the changes.

NTo clear an existing password (so that no password is required), enter a space in the Password and Re-enter Password fields and click the Submit button.

E-mail Alerts page

Access the E-Mail Alerts page (figure 5-8) by clicking the Configuration tab and then the Email Alerts link on the left side of the System Settings page. This page provides a way to set the GSS to automatically send e-mail alert messages when settings are changed on the GSS. You can enter up to 64 e-mail recipients.

System

Settings

Video Settings

Passwords

Firmware

Upgrade

Figure 5-8 — E-Mail Alerts page

Configure the GSS to send e-mail alerts as follows:

1.	On the Email Alerts screen, click the Edit button located to
	the right of the Mail IP Address and Domain Name fields.
	The Edit button changes to Save.
2.	Enter the GSS’s IP address and the appropriate domain
	name in the appropriate fields. If desired, select the SMTP
	Authorization required checkbox and enter the desired
	User Name and Password in the appopriate fields.

NAll of the variables and selections in step 2 are available from your network administrator.)

3. Click the Save button.

5-12 GSS 100 Graphic Still Store • HTML Control and IPL File Manager GSS 100 Graphic Still Store • HTML Control and IPL File Manager 5-13