Extron electronic IPL T PC1i manual Using the Configuration Pages, Specifying system settings

The System Status page displays information in the following categories:

•System Description: Includes product model, port and receptacle description, part number, firmware version, and the current date and time.

•IP Settings: Displays the unit name, DHCP status, IP address, gateway address, subnet mask, and the MAC address.

•Port, AC, and Executive Mode Settings: Shows settings for the RS-232 and Contact Input ports, name and On or Off status for the AC receptacle, and whether lock mode (executive mode) is on or off.

•Current Schedule: Shows the schedule currently in place for powering the output device on and off, and for enabling and disabling executive mode.

Using the Configuration Pages

To access the Configuration pages, select the Configuration tab. There are seven web pages that can be accessed from the Configuration page. They are listed in the sidebar menu at the left of the page. These pages are described in the following sections.

Specifying system settings

On the System Settings page, you can set the date and time, change the IP address information for the PC1, and enable or disable lock mode.

Figure 18. System Settings Screen on the Configuration Page

1.On the Configuration page, select System Settings from the sidebar menu at the left edge of the screen. The System Settings page appears, displaying either the factory default information for your PC1 or the settings submitted most recently.

2.Enter your new information in the IP Settings section, or select the date and time from the menus in the Date/Time Settings section, as described in the following sections.

IPL T PC1 • HTML Configuration and Control 24