Extron electronic IPL T PC1i manual Password and Security Settings, Remapping Port Designations

Command	ASCII (Telnet)	URL Encoded (web)	Response
	(Host to Switcher)	(Host to Switcher)	(Switcher to Host)

Password and Security Settings

Set administrator password24	E X3# CA}	W X3# CA	Ipa•X4! ]
Clear administrator password24	E•CA}	W %20 CA	Ipa•]

NOTE: A user password cannot be assigned if an administrator password does not exist. If the administrator password is cleared (removed), the user password is also removed.

View administrator password24	E CA}	W CA	X4! ]
Set user password14, 24	E X3# CU}	W X3# CU	Ipu•X4! ]
Clear user password24	E•CU}	W %20 CU	Ipu•]
View user password24	E CU}	W CU	X4! ]
Query session security level	E CK}	W CK	X5@ ]
			With tagged response –
			verbose modes 2 and 3:
			Pvl X5@ ]

NOTES: • The ]Password prompt requires a password (administrator level or user level), followed by a carriage return. The password prompt appears only if there is a password defined on the unit.

• The copyright information displayed upon connection to the IP Link product via TCP/IP or Telnet is followed by the password prompt.

• The ]Password prompt is repeated if a correct administrator or user password is not entered.

• If a correct administrator or user password is entered, the unit responds with ]Login Administrator] or ]Login User], depending on the password that was entered. If the administrator and user passwords are the same, it defaults to administrator privileges.

Remapping Port Designations

NOTE:	Duplicate port number assignments are not permitted; that is, Telnet and web cannot be the same. Entering
	duplicate port assignments results in an E13 (invalid parameter) error message.
Set Telnet port map24		E port number MT}	W port number MT	Pmt port number ]
Reset Telnet port map24		E 23MT}	W 23MT	Pmt 00023 ]
Disable Telnet port map24		E 0MT}	W 0MT	Pmt 00000 ]
View Telnet port map		E MT}	W MT	port number ]
Set web port map24		E port number MH}	W port number MH	Pmh port number ]
Reset web port map24		E 80MH}	W 80MH	Pmh 00080 ]
Disable web port map24		E 0MH}	W 0MH	Pmh 00000 ]
View web port map		E MH}	W MH	port number ]
Set Direct Access port map24		E 2001MD}	W 2001MK	Pmd 02001 ]
Disable Direct Access port map24		E 0MD}	W MD	W 0MD
View Direct Access port map		E MD}	WMD	port number ]
NOTE:	Remapping a port number (other than to reset it to the default 80 or 23, or to disable it by setting it to 0) must be
	to port number 1024 or higher.

IPL T PC1 • SIS Programming and Control 58