Extron electronic IPL T PC1i manual Scheduling by day of the week

Scheduling by day of the week

You can also select a day of the week and schedule all power and executive mode time settings for that day at one time:

1.Click on a day of the week at the top of a column in the Receptacle 1 scheduling table.

Two Set Schedule For sections open, one for Power On and Executive Mode On and one for Power Off and Executive Mode Off. These sections contain drop-down menus for selecting on and off times as well as check boxes for selecting the receptacle (power) and executive mode.

In the illustration below, Sunday has been selected for scheduling.

Figure 29. Schedule Screen Showing Fields for Daily Receptacle Scheduling

2.In either the Power ON or Power OFF section, select the hours, minutes, and am or pm from the menus; and select the check boxes for the items you want to schedule.

3.In the section in which you made your selections, click Set to enter your choices. The section closes.

4.If desired, repeat steps 2 and 3 in the other Set Schedule For section.

If you do not want to make selections in the remaining Set Schedule For section, click Refresh to close the section.

5.Repeat steps 1 through 4 for any additional days that you want to schedule.

IPL T PC1 • HTML Configuration and Control 37