Extron electronic IPL T PC1i manual Example 1439 =, IPL T PC1 SIS Programming and Control

X5(	=	IR Playback mode
		0	= play once
		1	= play continuously
		Response is returned with leading zeros.
		To stop mode 1 playback, send the IR command again with mode 0 selected.
X6$	=	Time in seconds to keep sending the broadcast message (0-255, default = 10)
X6(	=	(Ethernet only) Number of seconds before timeout on IP connections (min. = 1, max. = 6500, and
		default = 30 = 300 seconds).
		If no data is received during the timeout period, the Ethernet connection is closed. Each step is 10 seconds. The
		response is returned with leading zeros.
X7)	=	The number (as an optional parameter) that is inserted into the e-mail message if the .eml file has an embedded
		command (with no parameters).
X7!	=	Hardware (MAC) address: the four most significant hex nibbles converted into a single 16-bit decimal number.
X7@	=	Hardware (MAC) address: the eight least significant hex nibbles converted into a single 32-bit decimal number.
		NOTE: This can be up to 10 digits.
X7#	=	E-mail account user name. Maximum length is 31 characters. This parameter is optional; commas cannot be used as
		placeholders for it. If it is omitted from an issued command, any existing user account name is cleared.
X7$	=	E-mail account password. Maximum length is 31 characters. This parameter is optional; commas cannot be used as
		placeholders for it. If it is omitted from an issued command, any existing user account password is cleared.
X71! = Days of the week
		1	= Sunday
		2	= Monday
		3	= Tuesday
		4	= Wednesday
		5	= Thursday
		6	= Friday
		7	= Saturday
X71@	=	Time in minutes (0-1440)
		0	= 12 am (midnight)
		1440 = clear schedule

Example: 1439 = 11:59

Use the following formula (in 24-hour time format): (hour x 60) + minutes = time in minutes

X71# = Power receptacle name (12 characters maximum)

IPL T PC1 • SIS Programming and Control 53